 The Sussman HU Series Steam humidification line of generators
has been designed to provide atmospheric, low pressure (under
15 psig) and high pressure (over 15 psig) steam for a multitude
of humidification and HVAC requirements. High quality steam
is efficiently and quietly generated with minimal generator
heat loss to the surroundings.
The Sussman HU Series is designed to operate in conjunction
with any commercial steam humidification equipment, including
duct-work installed humidifiers. Instantaneous and reserve-capacity
steam is manufactured within the pressure vessel for continuous
and intermittent steam flow rate requirements. Vessel design
minimizes carry-over and heating elements are designed for maximum
element-to-water contact for efficient operation.
Suitable for almost any application or environment requiring
a steam source for humidification purposes, the Sussman HU Series
Generators are recommended for:
- Protection of humidity-sensitive materials,
machinery and equipment.
- Reduction of static electricity in computer
rooms and professional offices.
- In the workplace, warehouse, copying/reproduction
rooms and wherever furniture, paper or food
goods are used or stored.
- Assuring a comfort-zone for personnel working
in hospitals,offices,libraries,schools,factory
staging and packing areas.
|
STANDARD
FEATURES
- WATER
FEED SYSTEM
Strainer, solenoid vavle and check valve factory wired and plumbed for direct connection to water line.
- LOW
WATER CUT-OFF/LEVEL CONTROL
McDonnell Miller No. 150 control automatically maintains proper water level, shutting off the boiler when water supply drops below a safe operating level.
- WATER
LEVEL SIGHT GLASS
Allows constant observation of water level while boiler is in operation.
- MAIN
ON-OFF SWITCH W/PILOT
Allows manual operation of the boiler operating control
circuit.
- PILOT LIGHT
Indicates control circuit's ON/OFF condition.
- INTEGRAL
POWER CONTACTORS
Magnetic contactors integrally mounted to control heating elements.
- BLOWDOWN/DRAIN
VALVES
Facilitates emptying the pressure vessel and water
column piping during blowdown sequence.
- LONG
LIFE HEATING ELEMENTS
Industrial grade, heavy duty 0.420 inch diameter stainless steel heating elements, equipped with one pice resistane welded terminations for added strength and safety.
- OPERATING
PRESSURE CONTROL
Resets automatically to maintain preset pressure within the boiler.
- ENERGY
SAVING AND MINIMUM MAINTENANCE
Pressure vessel fully insulated, minimizes heat
loss and maximizes energy saving.
- EASY
CONTROL MAINTENANCE
All control panels and components are easily accessible. Fully-louvered openings avoid component heat build-up.
- NEMA 1
Louvered enclosure standard
- TRIM
PRESSURE
Factory standard 15 PSIG
MEETING
CODE REQUIREMENTS
- Pressure vessel rated at 100 PSIG to ASME Section 1 Code M.
- Vessel National Board Registered
- UL Listed - Canadian Standards Association approved.
- Electrical construction conforms to NEC standards.
- IMPORTANT:
IF A BOILER IS FOR INSTALLATION OUTSIDE THE USA THE CUSTOMER/PURCHASER MUST ADVISE THE INSTALLATION LOCATION TO SUSSMAN PRIOR TO PLACING ORDER. ADDITIONAL COSTS AND/OR OTHER ACTIONS MAY BE INVOLVED IN COMPLYING WITH COUNTRY, PROVINCIAL AND/OR LOCAL JURISDICTIONAL CODE REQUIREMENTS. CUSTOMER/PURCHASER TAKES FULL RESPONSIBILITY FOR ADVISING SUSSMAN PRIOR TO THE TIME ORDER IS PLACED.
SAFETY
FEATURES
- STEAM
SAFETY VALVE
ASME Code valve, automatically opens to reduce pressure
should excessive steam cause pressure build-up.
- STEAM
PRESSURE GAUGE
Allows visual observation of steam pressure over full range.
- MANUAL
RESET PRESSURE CONTROL
Provides high limit pressure cut-out with manual
reset.
STANDARD
OPTIONAL EQUIPMENT
- AUTOFLUSH
AND DRAIN
For automatic daily flush/blowdown of pressure vessel and piping; motorized valve with steam rated seat, valving with 24 hour programmable timer.
<<View
HU Spec. Sheet>> |
